With the large improvement in technology, the number of modes of listening to music in the car while driving has increased to a great extent in an exponential way in the last decade. The latest development was the USB port. This can be found in the computers for data transfer between the computer and music players and mp3 players. This is however absent in the cars. But with little adjustments and connections, USB port can be used to play the mp3 player. This will need an extra adapter cable. This will allow any mp3 player to be plugged to auxiliary port on radio or even into the cigarette lighter. We must however know in detail how to use USB for a car stereo and the various connections involved.
Article Source: ArticlesView.com
This article lists all the tools required to use USB in the stereo of the car and it also explains the procedure to remove the same without much difficulty. If we go for a car mechanic or an engineer they may charge heavily or doing this simple work of installing the cable for port of USB .So, doing this on our own is the right choice.
There are a few tools needed to complete this task. The usage of these tools reduces the time consumed for the job. These include an mp3 player, a USB cable to AC power, a USB cable to AUX cable, and an USB cable. These tools can be purchased individually the USB cable is a very important component as only with it, one can transfer data or music from mp3 to the stereo of the car.
Get into the car. The audio system is switched on. If we find any media material like compact disc, cassettes in the in dash receiver of car, then it should be taken out first. Ignition engine of the car should be turned off. Hand brake is applied. Parking brake is the other term used to refer hand brake. Inspection of the stereo is done thoroughly. Locate the USB port and Aux port. The USB port is usually smaller whereas the Aux port is circular in shape. Do not get confused with the port of head phone as they both may appear nearly the same.
There is a provision for USB port in the stereo of the car where the cable is plugged after connection with player for MP3. Even if we don't find USB port there is absolutely no problem as we can use Axillary port instead of the port for USB cable connection.
In the next step the data USB cable is connected to the mp3 player. This is then fixed in the port provided for inserting the USB in the stereo of the car. Then the USB port must be selected as the input source. This can be easily done by using the control option present in the stereo. In case if there is no USB port then one can use the AUX plug to connect the USB cable of the mp3 to the player via an AUX cable.
In the next step the aux jack and the aux port should be connected. Now a connection is established between the USB cable and AC power adapter. Then this is connected to the music player. There is a connection between the AC adapter and the cigar lighter.
Now turn the radio on and tune to frequency with no transmission. The frequency of the radio is adjusted to match the AC adapter. When this happens the music from the mp3 will be played on the radio. So it is very essential for one to know how to use USB for a car stereo.
About the Author
Looking to find the best deal on Auto Hifi, then visit www.powernetshop.at to find the best advice on Car audio for you.
by: Chris Green - Total views: 5 - Date: Thu, 11 Feb 2010
Publish/Share this article
By publishing this article, you agree to all the terms in our Terms of Service.
Rating: Not yet rated
